Which iron set should i get




















Putts are said to break either left or right. Cavity Back — An iron design featuring a hollowed-out cavity behind the clubface, which places more weight around the edges of the clubhead for higher Moment of Inertia MOI and forgiveness. Many putters are built in the same style. Center of Gravity CG — The exact point in the clubhead where the head is perfectly balanced.

In general, the lower the CG, the higher the ball will launch off the clubface. Cut aka Fade — A shot that curves gently to the right when struck by a right-handed golfer. For lefties, a cut or fade curves to the left. Draw — A shot that curves gently to the left when struck by a right-handed golfer. For lefties, a draw curves to the right.

Fat Shot — When the club contacts the ground behind the ball, usually causing a loss of yardage compared to a solid strike. While less-skilled golfers need clubs with maximum forgiveness, better players often prefer less forgiving clubs which make it easier to intentionally curve the ball.

Grooves — A series of straight, parallel lines cut into the clubface, typically horizontal to the ground. Handicap aka Handicap Index — A number that represents the skill level of a golfer. The lower the handicap, the better the golfer. The weaker player may deduct strokes based on the stronger player's handicap. Your actual handicap is based on a complex calculation taking into account your golf scores and the relative difficulty of the course. Hook — A shot that curves hard to the left when struck by a right-handed golfer.

For lefties, a hook curves to the right. Loft — The number of the club indicates how high and far the shot will travel. The higher the number, the greater the angle of loft is. When the loft is very high, the ball will fly higher but for a shorter distance. Long Iron — An iron with minimal loft used to hit the ball a long distance.

The 2 — 4 irons are considered long irons. Mid-Iron — An iron with medium loft used to hit the ball a medium distance. The 5 — 7 irons are considered mid-irons. Moment of Inertia MOI — A measurement in grams per centimeters-squared of how much a clubhead resists twisting on impact with the ball.

Muscle Back — An iron design with no cavity in the back of the clubhead. This classic club style features more weight behind the sweet spot and is less forgiving than a cavity back model, but is often favored by top players due to its feel and ball flight. Par — The score a scratch golfer is expected to make on a hole, assuming two strokes on the putting green. Featured in drivers, fairway woods, hybrids, irons and putters, this design creates a higher Moment of Inertia and enhanced forgiveness.

Scratch Golfer — A player with a handicap of 0 who typically averages an hole score around even-par. For lefties, a shank shoots to the left. Short Iron — An iron with high loft used to hit the ball a short distance. The 8 — 9 irons are considered mid-irons.

Slice — A shot that curves hard to the right when struck by a right-handed golfer. For lefties, a slice curves to the left. A slice is considered the most common mistake among amateur golfers. Sole — The bottom of the clubhead i.

Thin Shot — When the bottom part of the clubface strikes the ball at or just below its equator, causing the ball to fly very low and often past the target. You get to try it when, where, and how you want for two weeks before deciding if you want to buy it or not. Want to test out two different brands, or two different configurations? No problem. This isn't 30 minutes on the range with range balls or looking out of the Pro-Shop window. Use it as much as you like so you can really know what the product will do for your game before you invest in it.

If you don't love it, simply put it back in the box it came in, use the included prepaid return shipping label, and send it back to us. That's it. I personal like to have a mix of hybrids, woods and irons and I also like to keep my lower irons because I am able to hit them more consistently.

This is why we recommend a fitting so much because you can discover many tips and tricks that will help to improve your individual game. This will help you to consistently get the ball in the air. You also likely want to be looking at graphite shafts — these will tend to be a little more forgiving and allow you to gradually improve your game. Many high handicappers will want to purchase irons that are typically reserved for better players, in the hope that they will improve and continue to be able to use the same clubs.

The problem is, throwing yourself in the deep end in that way makes it difficult to improve in the first place. Cobra have quickly become one of our favourite brands when it comes to golf clubs for beginners and intermediate. Having played with the Cobra XL Speed set, I know that they are a consistent brand that deliver quality. The shafts are graphite for slower swing speeds and you can get regular or light flex on these cavity backs to perfectly complement your game.

Mid-handicappers are a little more difficult. Professionals and very high level golfers will generally go for steel shafts with a narrow head, less experienced players the opposite. The mid-handicapper can go either way. As the Golf Digest article above outlines, these clubs utilise significant amounts of technology to help you get the best of both worlds.

Taylor Made are at the top of the game when it comes to irons and if you really want to take your game to the next level, the M6 set is one of the very best ways to do it. You can get steel or graphite shafts to suit your swing speed and these irons are specially crafted for control, accuracy and distance. You choose between stiff, regular and senior flex to complete the perfect club set and these are widely accepted as some of the very best clubs on the market today.

Without wanting to generalize, seniors will generally have slower club speeds — and fair enough too. As a result, steel shafts are going to be inappropriate for the majority of older golfers. Instead, opt for a graphite shaft, something a little lighter and easier to swing. When I was a good player — hey, I used to play a lot before having kids — I once decided to give a set of blades a try with the hopes that it would help me score better. As luck would have it, the blades did make it a cinch to shape shots — I could hit an 8-iron with a yard fade that stopped on a dime.

But with that added shot-making playability came a huge price. I lost a massive dose of forgiveness and my misses were significantly worse than they were with my previous set of cavity-backs. Because I was and still am nowhere near an elite player, I needed forgiveness way more than I needed the ability to shape shots. I needed forgiveness over almost anything else because I frequently miss the sweetspot.

Instead, be true to yourself and what you need to play your best golf. Pros: Excellent design that allows for precise weight distribution in the club face, should deliver more distance and accuracy for off-center ball strikes, long irons are more playable in this set. Cons: Extremely expensive for inexperienced players, may cause some vibration in the hands during ball striking. Callaway has long received high marks for its ability to create high-quality golf clubs, especially irons. The company has put together an impressive collection of design improvements and upgraded technology in the Big Bertha OS irons.

These irons start with an Exo-Cage structure that reduces weight while creating stiffness in the clubhead. Through this design, Callaway is able to keep the weight of the iron low in the clubface and deliver better speed to the golf ball. Most high handicap players strike the ball lower on the clubface than more advanced players, so these irons will deliver nice results to inexperienced players. All of these features will help average and high handicap golfers have more success in their shot-making with the Big Bertha OS irons.

Average players should notice a significant difference in the long irons in the set, too. If you normally save your long irons for scooping your golf ball out of the pond, rather than making shots with them, you'll actually be able to use these clubs for a shot on the course because of how forgiving they are.

The Big Bertha OS irons contain a larger-than-average sweet spot, allowing off-center ball strikes to stay on target better. The design of these irons also lets the ball speed to remain consistent across a larger section of the clubface, providing extra distance.

For a golfer looking to cut his or her scores, having a little extra distance in the irons is helpful. Pros: Minimal but significant design upgrades from previous version, perfect design for low handicap players, long irons will deliver a consistent distance, forgiving clubface design keeps off-center shots on line. Cons: Very expensive set of irons, not really designed for average or high handicap players.

The Titleist AP2 iron set has been proven successful on the professional tour, and the same technologies and design features in these irons that appeal to pro golfers also make them an excellent choice for low handicap amateur players. These Titleist irons are forgiving for any shots slightly struck off-center, which allows you to maintain a precise distance control. Titleist changes the center of gravity from club to club in the individual irons in this set, maintaining a lower center of gravity in the long irons to deliver consistent performance, which is a great feature for people who struggle to hit long irons.

As you move through the shorter AP2 irons, Titleist moves the center of gravity higher on the clubface, delivering a good feel for the shorter shots where low handicap players will want more control. Titleist uses a steel face insert in its longer irons through the 6-iron. From the 7-iron through the pitching wedge, the club construction consists of a carbon-steel face and body. Along with the steel face insert in the long irons, Titleist placed tungsten in the heel and toe of the AP2 long irons, which keeps the clubface on line and delivers a higher launch at impact.

Pros: New design and materials deliver extra ball speed for more distance, carbon-fiber insert absorbs vibrations at impact for comfortable ball strikes. Cons: You'll pay a little extra for the new features, those with slow swing speeds won't receive a huge distance jump. If you'd like your game to deliver a little more intimidation to your regular weekend foursome, wearing red probably won't do it unless you have a young Tiger's length off the tee and signature fist pump.

These attention-grabbing irons look amazing, but they also deliver some excellent design features that will help you hit the ball farther, which is more likely to intimidate your foursome partners than the occasional fist pump.

The Cobra King irons use a thin steel insert that delivers outstanding distance versus most irons. Additionally, the irons feature tungsten in both the heel and toe of the iron, which helps you keep these irons on the correct swing path, again leading to more distance.

Finally, these impressive irons include a carbon-fiber insert just behind the hitting zone in the face of the club. This absorbs any vibration that you may have from an off-center ball strike, which allows you to finish the swing strong and gain all of the distance you're seeking.

A set of irons consists of several clubs, all featuring a similar look. However, each individual iron in the set delivers a different angle of the clubface to the ball, which results in varying distances and trajectories.

Irons also have shafts of differing lengths. An iron set should contain at least a 5-iron through a pitching wedge and include six total clubs.



0コメント

  • 1000 / 1000